Ford Fiesta Radio Set Up

Follow either Set Up 1 or 2 according to the interface that applies to your radio. If you have any issues during the installation process, please do not hesitate from contacting us. 

SET UP 1 

Once you have installed the unit, you will need to set-up the CanBus, which can be done by going into device settings > factory settings > type in 0000 as password > set as shown in the image below according to your vehicle

How to set steering wheel control functions: select the steering wheel controls menu and with one hand press a button on the menu, and with the other press the desired button on the steering wheel. 

How to set car logo: settings > factory settings > type in 0000 as password > Logo Settings

How to set button light colour: settings > car settings > base settings > panel colour settings

 

SET UP 2 

Once you have installed the unit, you will need to set-up the CanBus, which can be done by going into device settings > factory settings > type in 0000 as password > CAN settings > CANBUS type > set as shown in the image below

How to set steering wheel control functions: select the steering wheel controls menu and with one hand press a button on the menu, and with the other press the desired button on the steering wheel. 

How to set car logo: settings > factory settings > type in 0000 as password > Logo Settings

How to set button light colour: settings > car settings > base settings > panel colour settings

If your Touchscreen Buttons do not seem to be working, follow the guide in video below.

FORD FIESTA RADIO - SET UP - YouTube

CARPLAY / ANDROID AUTO Setup

Connect phone to radio through Bluetooth and access Z-Link App to use CarPlay and Android Auto. Once in the loading page, go on to settings and change to High Frame Rate for a smoother CarPlay/Android Auto experience.